Digital servo med en kraft på 10kg på 7.4V i løpet av 0,13 sekund. Har metall gir og dobbelt kulelager. Passer normalt til biler, større båter, fly opptil ca. 2m og 500-600 helikoptre.
Info fra Hitec:
The metal D-625MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
D625MW Servo Specifications
| Performance Specifications |
| Operating Voltage Range (Volts DC) |
4.8V ~ 6.0V ~ 7.4V |
| Speed (Second @ 60°) |
0.20 ~ 0.15 ~ 0.13 |
| Maximum Torque Range oz. / in. |
87 ~ 122 ~ 139 |
| Maximum Torque Range kg. / cm. |
6.3 ~ 8.8 ~ 10.0 |
| Current Draw at Idle |
30 mA |
| No Load Operating Current Draw |
500 mA |
| Stall Current Draw |
2,650 mA |
| Dead Band Width |
2 µs |
| Physical Specifications |
| Dimensions (Inches) |
1.59 x 0.77 x 1.48 |
| Dimensions (Metric) |
40.6 x 19.8 x 37.8 |
| Weight (Ounces) |
2.11 |
| Weight (Gram) |
57.0 |
| Circuit Type |
32bit Programable Digital |
| Motor Type |
3 Pole Metal Brush Ferrite |
| Gear Material |
Metal |
| Bearing Type |
Dual Ball Bearing |
| Output Shaft (type / Ømm) |
H25T |
| Case Material |
Plastic |
| Dust / Water Resistance |
N / A |
| Connector Gauge (AWG) / Strand Count |
22 / 60 |
