RC byggesett av Toyota Land Cruiser 40 med belter som gir en helt ny RC opplevelse. GF-01FT chassiset er en variant av 4WD offroad GF-01 chassiset med belter, dette gir helt nye muligheter til å kjøre i terrenget. Leveres med et holdbart polykarbonat karosseri og en kraftig børstemotor.
Behøves utenom som ikke er inkludert:
2-kanals fjernkontroll og mottaker
7.2V Ni-Mh batteripakke og lader
Fartsregulator
Styreservo
Lakk/maling til karosseriet
Spesifikasjoner:
RC byggesett
Chassis type: GF-01FT
Skala: 1/12
Lengde: 33,7 cm
Bredde: 25 cm
Høyde: 23,6 cm
Terreng: Off-road
Drift: 4WD firehjulsdrift belter
Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert)
Motor: Type 540 børstemotor (inkludert)
Karosseri: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert)
Lakk/maling anbefalt av Tamiya:
PS-1 White
PS-4 Blue
PS-5 Black
X-2 White
X-11 Chrome Silver
XF-1 Flat Black
XF-2 Flat White
XF-7 Flat Red
XF-15 Flat Flesh
Informasjon fra Tamiya:
Toyota’s Land Cruiser is one of the most recognizable 4WD vehicles in the world, especially the 40, a series which was sold from 1960 to 1984. You can now enjoy this iconic Toyota in a fun all-new way. This R/C kit features the Toyota Land Cruiser 40 mounted on top of the GF-01 with a twist. It includes track units, so you can transvers dirt, snow, gravel, and other terrain in a whole new way! Welcome the GF-01FT)
• 1/12 scale R/C model assembly kit. Length: 337mm, width: 250mm, height: 236mm. Wheelbase: 174mm.
• This model recreates the Land Cruiser 40 Pick-Up equipped with 3-sided track units in place of tires.
• These track units offer superlative traction compared to tires but also enable the model to run even on snow, sand, mud and other testing conditions with stable traction.
• The model is based upon the gear-driven 4WD GF-01FT chassis featuring a monocoque frame with power provided by the centrally-positioned motor via front/rear differential gears.
• "Square" layout with similar wheelbase and tread measurements provides unique performance.
• Choose between two types of track links; standard flat designs, and toothed grouser designs.
• A lightweight, polycarbonate body, and driver figure included.
• Type 540 motor included.
• Requires: 2-channel radio, steering servo, ESC, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint.
