Hotshot II ble utgitt i 1987 og er tilbake for første gang siden det. Etter den populære utgivelsen av Wild One Off-Roader, Blockhead Motors, har Tamiya igjen invitert den japanske designeren Jun Watanabe til å produsere sin egen versjon som har blitt Hotshot II Blockhead Motors. Modellen leveres med en kraftig børstemotor og ferdig lakkert polykarbonat karosseri.
Behøves utenom som ikke er inkludert:
2-kanals fjernkontroll og mottaker
7.2V Ni-Mh batteripakke og lader
Styreservo
Fartsregulator
Hurtiglim
Spesifikasjoner:
RC byggesett
Skala: 1/10
Lenge: 39 cm
Bredde: 23,5 cm
Høyde: 15 cm
Terreng: Off-Road
Drift: 4WD
Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert)
Type 540 børstemotor
Lakkert polykarbonat karosseri
Informasjon fra Tamiya:
Customized Hotshot II
The Hotshot II debuted in 1987, a follow up to the Hotshot, our wildly popular first-ever shaft driven 4WD buggy. Now, the Hotshot II makes a re-appearance with various tweaks added by the famous Japanese designer Mr. Jun Watanabe. It features an overhauled color scheme of brilliant blue (body and wing are pre-painted in this color, and pre-cut), with a prominent white stripe. The driver figure position has also been reevaluated, while the upper deck and roll cage are new components, bringing the driver up to a more realistic location. Guards and car number plates were also designed by Watanabe, while the motor has a dedicated sticker.
Shaft Driven 4WD Chassis
Based upon the original Hotshot II design, this shaft driven 4WD chassis has sealed gearboxes and differentials front and rear and gives an intuitive drive. The front of the four-wheel double wishbone suspension employs a monoshock setup, with two dampers at the rear (all are CVA oil dampers molded in yellow), while metal plated parts such as uprights and wheels give the model a realistic look. The latter are shod with hybrid oval block/pin spike low-profile tires.
Specifications
★Length: 390 mm, width: 235 mm, height: 150 mm
★Weight: 1,285 g
★Tread: 205 mm (front), 200 mm (rear)
★Tire width/diameter: 31/88 mm (front), 38/88 mm (rear)
★ABS monocoque
★Shaft-driven 4WD
★3-bevel differential gears
★2-piece steering tie-rod
★4-wheel double wishbone suspension
★Gear ratio = 8.70:1
★Type 540 motor (with dedicated sticker)
★Electronic speed controller (ESC) is sold separately.
